How To Install a Chandelier On The Countertop

Lighting in a home is crucial and important, thus having a chandelier that projects the light throughout the house is certainly very important. Then, of course, choosing the right one will certainly create a different look to your home. Often, however, you also have to deal with the type of ceiling to hang the chandelier. It is not uncommon for many homes to be equipped with plasterboard countertops, which are not suitable for carrying huge loads like the chandeliers. Especially, when your ceiling was made of asbestos, you better search for asbestos removal Perth service first (

Chandelier On The Countertop

Countertops are suitable for many remodelling jobs, but because of the way they are built, they are not designed to withstand heavy loads such as a chandelier. However, using the structural elements of the home which the false ceiling is connected, you can install a chandelier. You may create the impression that it is suspended from the ceiling. Here’s how to install a chandelier in the false ceiling, through a few simple steps that will allow you to mount it securely. Let’s go to the work!

Turn off the electricity in the room where the chandelier will be installed, or for the better, throughout the house; This is the first step to ensure a safe installation. If you are replacing an existing light fixture, you should remove it safely before installing the new one. Then you must hand it over to a helper rather than trying to get down from the stack while carrying it down. If you install the chandelier in a new place, mark the desired point with a pencil and make a hole to pass the wires. Before proceeding with the installation, use a voltage tester to make sure that there is no current passage through the ceiling wires.

Remove the false ceiling tile at the point where the chandelier must be positioned. Drop a lead wire down from the ceiling beam to measure the distance of the lead wire line to the false ceiling on both sides of the removed panel. Transfer the dimensions on the removed panel and drill a 2-3 cm diameter hole in the panel with a multi-purpose knife. Connect the chain and the power cord of the chandelier, then pass the cables through the hole. Glue or screw the panel to the false ceiling in the same place from which it was removed.

Screw a metal hook into the ceiling beam, in the same position as the lead wire. Screw a junction box into the truss next to the hook and pass the power cord from the chandelier to the switch by connecting the wires to the chandelier. Thread the wires and isolate them with the special adhesive tape. Screw the cover on the junction box (switch) and hang the chain of the chandelier, both to the hook and to the girdle. Refit the panel to the ceiling, turn on the electricity, and turn on the switch to check that the chandelier is working properly. So I do not have to wish you a good job.

Chandeliers become the most common use of designed objects. They are made of different shapes, designed to meet the most varied customer demands. This brings more or less small wall chandeliers (applique) to be applied to the ceiling or walls without suspending them. Also thanks to the evolution of light diffusion studies in environments.

Today, these diffusers are increasingly used. These “hidden” light beams are framing the rooms. The further away from the beauty of an artisan chandelier made by skilled hands. However, the original shape can give that extra touch to every room in our home.

The history of the chandelier is born with the need for man to illuminate indoor environments using multiple lights. The first chandeliers were formed by a series of candles arranged in circles and supported by spokes which are a central fixture fastened to the top and suspended. The chandelier was already then an artificial lighting fixture hung on the ceiling or applied to a height that illuminates the surrounding environment.

As time goes by, wood, iron, and metal alloys, then move to other materials to build the chandelier structure with the candles that will eventually be replaced by gas illumination and light bulbs.

This entry was posted in Kitchen Design. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *